How To Fix ‘Ethernet Doesn’t Have A Valid IP Configuration’ Error

January 1, 2024

If there is a problem with your NIC, Ethernet will not have a correct IP configuration (or Network Interface Card). It occurs as a result of an invalid IP address being detected. If there is a problem with your NIC, Ethernet will not have a correct IP configuration (or Network Interface Card).

It occurs as a result of DHCP catching an incorrect IP address. The majority of the time, the issue is caused by a bad driver or network settings.

In such circumstances, the solution is straightforward and straightforward. However, if the NIC has a hardware defect, you may need to replace it. You will be unable to connect to the Internet as a result of this issue.

How To Resolve The Error “Ethernet Doesn’t Have A Valid IP Configuration”

You can try some simple and quick ways to fix your situation before moving on to the strategies listed below in this tutorial. Try rebooting your routers or modems to see if the problem goes away.

Alternatively, unplug and replug the connection labels to make sure the loose connection isn’t causing the Ethernet doesn’t have a correct IP configuration issue.

If the problem persists, it’s possible that the problem is due to a defective Network Interface Card. You must exercise extreme caution, since this could result in the Windows Update Error 80244019.

Read Also:

Follow this tutorial to resolve the Ethernet doesn’t have a valid IP Configuration issue on Windows 10. It is made up of a number of excellent ways that can assist you in getting out of this circumstance. Begin with the first method and work your way down until one of them solves the problem.

Before you begin, bear in mind that you must be an advanced user to carry out these operations because if you perform them improperly, they might permanently damage your hardware and potentially result in the DNS Server not responding problem in Windows.

Method 1: Update your BIOS (Board of Instructions)

There’s a potential that a BIOS update for your system will correct the problem. The technique for updating your BIOS will not be covered in this guide because it varies from system to system.

You’ll have to do your own research to find a procedure that works for your system. It should be noted, however, that some mistakes may occur during the upgrade process, causing your motherboard to cease working completely.

You can also check the official driver’s website for your modem or router to see if the firmware for your device has been updated.

Method 2: Update the drivers for your network adapters

First and foremost, launch the Windows Explorer.
Next, right-click on This PC and select Properties from the drop-down menu.
Locate the Device Manager option on the left and select it.
Next to the Network Adapters, there will be an arrow. To expand the list items, click the arrow.
Next, right-click on the Network Adapter and select Update Driver from the context menu.
You must be connected to the Internet to complete this step. For this purpose, you can utilise either WiFi or a wired connection. Once you’ve connected to the Internet, look for the Update Driver Software option in the search bar.
Finally, reboot the PC and see if the Windows 10 Ethernet doesn’t have a correct IP configuration error persists.

Method 2: Uninstalling Ethernet Drivers

The error Ethernet doesn’t have a valid IP Configuration might sometimes be caused by the updated driver. Uninstalling the Ethernet drivers may be the best option in this scenario. Follow the procedures below to uninstall Ethernet driver:

First and foremost, launch the Windows Explorer.
Now, right-click on the This PC icon and select Properties from the menu.
On the left side of the screen, select the Device Manager option.
Next, expand the list of Network Adapters by clicking on the Android next to the Network Adapters.
Right-click on the Network Adapter you want to delete and select Uninstall.
From the right-click menu, select the Uninstall Device option.
After that, click OK and move on to the final stage of the operation.
Select Action from the drop-down menu, then Scan for Hardware Changes. It will revert the drivers to their original state.
Finally, restart your computer to see if the problem persists.

Method 3: Restoring The TCP/IP Settings

To begin, press and hold the Windows + S key combination.
You’ll see a search menu appear. In the search menu that appears, type Control Panel and then press the enter key.
Next, under the Control panel, select the Network and Sharing Center option.
Now, from the View, your active networks, select the Network you want to fix by selecting the Connections option directly next to it from the View, your active networks menu.
A pop-up window will appear. You must then select the Properties button from the pop-up menu.
In the properties window, click the Install button, and then pick Protocol.
Next, go to the Add menu and select the Reliable Multi-Cost Protocol option.
Finally, press the OK button and restart your computer. Check if the Ethernet doesn’t have a proper IP configuration problem is still present.

Method 4: Configure TCP/IPv4

To begin, press and hold the Windows + S key combination.
A search menu will display after that. Now type Control Panel into the search box and press the enter key.
Now, in the Control Panel, select the Network and Sharing Center option.
Next, from the View, your active networks menu, select the Network you want to repair by selecting the Connections option next to it.
A pop-up window will appear. You must then select the Properties button from the pop-up menu.
Now, under the title This Connection Used the Following Items, pick Internet Protocol Version 4 (TCP/IPv4) as an option.
Next, select Properties from the drop-down menu.
A window will display; tick the boxes for Obtain PNS server addresses automatically and Obtain an IP address automatically.
Finally, restart the computer system to determine if the Ethernet doesn’t have a valid IP Configuration issue has been resolved or if it persists.

Method 5: Disable And Re-enable Your Network Adapter

To begin, press and hold the Windows + S key combination.
You’ll see a search menu appear. Now, in this search menu, type Control Panel and then press the enter key.
Next, go to the Control Panel and select the Network and Sharing Center option.
Next, from the View, your active networks menu, select the Network you want to fix by selecting the Connections option next to it.
To disable the Network Interface Card, select the Disable option. After that, right-click it again and select the Enable option.
Finally, restart your computer to determine whether the Ethernet doesn’t have a correct IP Configuration issue persists.

You can also try to fix the WiFi you’re using if you believe it doesn’t have a correct configuration.

Read Also:

Conclusion

We hope that at least one of the ways worked for you and that your system is now up and running. If you’re still having problems, you should have it looked out by a professional for a more thorough diagnosis via DHCP.

The majority of the time, the issue is caused by a bad driver or network settings. In such circumstances, the solution is straightforward and straightforward. However, if the NIC has a hardware defect, you may need to replace it. You will be unable to connect to the Internet as a result of this issue.